Oce VarioPrint 2090, Руководство по настройке и обслуживанию

Страница: 45 / 141

System configuration 41
Set the operator panel time-out
Introduction
If you create a copy job, you make settings for that job at the operator panel.
When you wait for some time (e.g. you leave the machine), the default start-up
screen will be displayed on the screen again (see figure). This reset of the
screen is called 'Operator panel time-out'.
You can set the value for the 'Operator panel time-out' timer in the Océ
VarioPrint 2090 Settings Editor (default value is 30 seconds).
[17] The default start-up screen
[17] The default start-up screen
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the key
operator mode (see ‘
Access the Océ VarioPrint 2090 Settings Editor in key
operator mode ’ on page 9 ).