Oce VarioPrint 2090, Руководство по настройке и обслуживанию

Страница: 72 / 141

68 Océ VarioPrint 2090 Configuration and maintenance manual
Adjust the network and printer properties
Change the TCP/IP settings
Introduction
Task for: system administrator
The system administrator is responsible for the connection of the Océ
VarioPrint 2090 to the network. You can set several copier/printer
identification settings, like printer name, IP address, default gateway and
Subnet mask.
If customers can send their print jobs to the Océ VarioPrint 2090, the system
administrator is responsible also for the access of these customers.
You can change the IP settings manually or you can enable DHCP to make the
Océ Smart Imager detect the IP settings (your network has to support DHCP).
Identification setting
Enable DHCP You can select the method to receive the IP settings. The
DHCP protocol allows the server to detect the IP
settings.
Possible values are
■
'Enable'
■
'Disable'
Default value is set to 'Enable'.
Host name
(printer
description) The host name describes the Océ VarioPrint 2090 name
on the TCP/IP network. Make sure that:
■
you use not more than 15 characters.
■
you select the characters from the list: a-z; A-Z; 0-9; -.
■
if you use a hyphen, put the hyphen in the name, not
at the begin or at the end.