Oce OP1018, Руководство по эксплуатации

Страница: 5 / 148

ADVANCED OPERATION GUIDE v
Introduction
Guides included
The following guides are included with this machine. Refer to the guide that
corresponds to your particular objective.
Installation Guide
This Guide contains instructions for assembling and installing the machine.
Operation Guide
This Operation Guide contains explanations on the initial installation and set-up of
this machine, the procedure to connect it to a computer, and the basic procedures
for using this machine as a copier, printer, and scanner as well as for resolving
problems if trouble occurs.
Advanced Operation Guide (This guide)
The Advanced Operation Guide contains explanations on copier, printer, and
scanner functions as well as default settings that can be adjusted on this machine.
This guide is stored on the CD-ROM as a PDF document.
Kyocera Extended Driver (KX Driver) User Guide
Describes how to install and set the printer driver. This guide is stored on the CD-
ROM as a PDF document.
Network FAX Driver Operation Guide
Describes how to use the Network FAX Driver to send documents created on a
network computer directly from that computer to the other FAX System. This guide
is stored on the CD-ROM as a PDF document.
PRESCRIBE Technical Reference
PRESCRIBE is the native language of the Kyocera Mita printers. This Technical
Reference contains the information about how the printing is performed using the
PRESCRIBE commands as well as the font and emulation description. This guide is
stored on the CD-ROM as a PDF document.
PRESCRIBE Command Reference
Gives a detailed explanation of the PRESCRIBE command syntax and parameters
with the aid of print examples. This guide is stored on the CD-ROM as a PDF
document.
KM-NET for Clients Operation Guide
KM-NET for Clients is a network printing utility intended to monitor and configure the
printing system. This guide describes how to install and operate KM-NET for Clients.
This guide is stored on the CD-ROM as a PDF document.