Oce OP1018, Руководство по эксплуатации

Страница: 53 / 148

System Settings
ADVANCED OPERATION GUIDE 5-5
Machine Settings
Changing Function Defaults
For functions that you use often, changing the default value to the setting will
minimize the time required to make that setting each time the corresponding function
is used. The following table shows the functions for which the default values can be
changed and their available settings. The factory default settings are shown with an
asterisk (
* ).
1
Access Function Default .
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii .
2
Press S or T to select the default setting that you want to change and press
Enter . The screen for the selected default setting is displayed.
3
Press S or T to select the new default setting and press Enter . The display
shows Completed and returns to the Function Default screen.
Function Available Settings Reference
Scan Color Select
*
Full Color
Grayscale
Monochrome page 2-5
Scan Resolution
*
200 x 100 Normal
200 x 200 Fine
200 x 400 Sup Fine
300 x 300 dpi
400 x 400 Ult Fine
600 x 600 dpi page 2-6
Original Quality * Text + Photo
Photo
Text page 1-2 , page 2-
5
Exposure
*
Auto
Manual page 1-2 , page 2-
6
Zoom
*
Auto
100% page 1-3 , page 2-
8
Collate
*
Off
On page 1-5
Orig. Placement
*
Top Edge to Rear
Top Edge to Left page 1-4 , page 2-
8
File Name Entry doc page 1-11 , page
2-10
File Name Entry/Additional
Info.
*
None
Date and Time
Job No. -
System Menu/
Counter
S or T
Function Default
Enter