Oce OP1018, Руководство по эксплуатации

Страница: 19 / 148

Copying Functions
ADVANCED OPERATION GUIDE 1-11
Print Override Mode
The print override mode allows the current job to be interrupted in order to make
copies of a more urgent job. After the print override processing is completed, the
interrupted job will be resumed.
1
Press Copy . The basic screen is displayed.
2
Press Function .
3
Press S or T to select Print Override and press Enter . The Print Override screen is
displayed.
4
Press S or T to select On and press Enter . The display shows Completed and
returns to Function screen.
5
Press right Select . The basic screen is displayed.
6
Program the functions as required and use the numeric keys to enter the number of
copies required.
7
Place the original on the platen or in the document processor.
8
Press Start . Copying begins immediately and completed copies are delivered to the
output tray.
9
When the job is completed, perform the steps 1 through 4 to select Print Override
mode Off .
File Name Entry
The file name is used for an e-mail report that notifies the end of copying (refer to
Sending the Job End Report on page 1-13 ). It is also listed in the Status menu for
administration. The file name contains the time stamp or job number.
1
Press Copy . The basic screen is displayed.
2
Press Function .
3
Press S or T to select File Name Entry . Press Enter . The File Name Entry screen
is displayed.
4
Enter the file name between one and 30 characters using the numeric keys (refer to
Character Entry in the Operation Guide) and press Enter . The Additional Info screen
is displayed. The factory default setting for the file name is doc.