Installing the Driver & Software
27
Windows
®
W
ind
ows
®
Wi
rel
ess
Ne
tw
o
rk
9
Choose the appropriate key number and
press
OK
.
72.WLAN
WEP key
a
KEY1:
b
KEY2:
Select
ab
or OK
Enter the WEP key you wrote down in step
1
using the dial pad. You can use the
and
keys to move the cursor. For example, to
enter the letter
a
, press the
2
key on the dial
pad once. To enter the number
3
, press the
3
key on the dial pad seven times.
The letters appear in this order: lower case,
upper case and numbers.
Press
OK
when you have entered all the
characters, then choose
1.Yes
and press
OK
to apply your settings. Go to step
12
.
Most access points and routers can store
more than one key, but they will only use
one at any time for authentication and
encryption.
10
Press
or
to
choose
TKIP
or
AES
for
Encryption Type
and press
OK
.
Enter the WPA-PSK Password you wrote down
in step
1
using the dial pad. You can use the
and
keys to move the cursor. For
example, to enter the letter
a
, press the
2
key
on the dial pad once. To enter the number
3
,
press the
3
key on your dial pad seven times.
Press
OK
when you have entered all the
characters, then choose
1.Yes
and press
OK
to apply your settings. Go to step
12
.
11
Enter the user and press
OK
. You can use
and
keys to move the cursor. For example,
to enter the letter
a
, press the
2
key on the dial
pad once.
Enter the password and press
OK
, and then
choose
1.Yes
and press
OK
to apply your
settings. Go to step
12
.
(Use the chart on
Entering text
on page 48.)
12
Your machine will now try to connect to your
wireless network using the information you
have entered. If successful,
Connected
will
appear briefly on the LCD.
Connection NG
is displayed when the print
server has not successfully connected to your
router or access point. Try starting from step
3
again. If the same message is displayed again,
reset the print server back to the default factory
settings and try again. (See
Restoring the
network settings to factory default
on page 47.)
13
The machine will automatically acquire the
correct TCP/IP address information from your
access point (router) if DHCP is enabled
(DHCP is normally enabled as default for most
access point routers).
If your access point does not have DHCP
enabled you will need to manually configure
the IP address, subnet mask and gateway of
the machine to suit your network. See the
Network User’s Guide for details.
Wireless setup is now complete. To install
the Multi-Function Suite, continue to
step 14.
Note
The supplied CD-ROM includes the ScanSoft™
PaperPort™ 11SE. This software supports
Windows
®
2000 (SP4 or greater), XP (SP2 or
greater), XP Professional x64 Edition and
Windows Vista
®
only. Please update to the latest
Windows
®
Service Pack before installing
Multi-Function Suite.
14
Turn on your computer. (You must be logged
on with Administrator rights.) Close any
applications running before installing the
Multi-Function Suite.
Note
Before installation, if you are using personal
firewall software, disable it. After the installation,
restart your personal firewall software.
