Installing the Driver & Software
22
STEP 2
Windows
®
W
ind
ows
®
Wi
rel
ess
Ne
tw
o
rk
3
For Wireless Network Interface Users in infrastructure mode
(For Windows
®
2000 Professional/XP/ XP Professional x64
Edition/Windows Vista
®
)
Connecting your wireless machine and wireless network together and
installing the printer driver in infrastructure mode
First you must configure the wireless network settings of your machine to communicate with your network access
point (router). After the machine is configured to communicate with your access point (router) computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
Multi-Function Suite. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal every day document printing, place the cx2100 as close to the network
access point (router) as possible with minimal obstructions. Large objects and walls between the two devices as
well as interference from other electronic devices can affect the data transfer speed of your documents.
Important
The following instructions will offer two methods for installing your cx2100 in a wireless network
environment. Both methods are for infrastructure mode, using a wireless router or access point that
uses DHCP to assign IP addresses. If your wireless router/access point supports SecureEasySetup™
follow the steps on page 24
Using the SecureEasySetup™ software to configure your machine for a
wireless network
. If your wireless router/access point does not support SecureEasySetup
™
follow the
steps on page 25
Using the Setup Wizard from the control panel LAN menu for wireless network
configuration
. To set up your machine in any other wireless environment you can find instructions in
the Network User’s Guide on the CD
-
ROM.
You can view the Network User’s Guide by following the instructions below.
1 Turn on your computer. Insert the
Océ
CD-ROM into your CD-ROM drive.
2 If the language screen appears, click your language. The CD-ROM main menu will appear.
3 Click the
Documentation
.
4 Click the
PDF documents
.
5 Click the
NETWORTK USER’S GUIDE
.
Note
• If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
• If you are using personal firewall software (e.g. Windows
®
Firewall), disable it. Once you are sure that you can
print, restart your personal firewall software.
