Installing the Driver & Software
25
Windows
®
W
ind
ows
®
Wi
rel
ess
Ne
tw
o
rk
Using the Setup Wizard from the control panel LAN menu for wireless
network configuration
Important
Make sure that you have finished the
instructions from step 1
Setting Up the
Machine
on pages 4 through 11.
These instructions will install your cx2100 in a typical
small office or home wireless network environment in
infrastructure mode, using a wireless router or access
point that uses DHCP to assign IP addresses.
If you want to setup your machine in any other
wireless environment you can find instructions in the
Network User’s Guide on the CD-ROM.
You can view the Network User’s Guide by following
the instructions below.
1 Turn on your PC. Insert the
Océ
CD-ROM into your
CD-ROM drive.
2 If the language screen appears, click your
language. The CD-ROM main menu will appear.
3 Click
Documentation
.
4 Click the
PDF document
.
5 Click the
Network User’s Guide
.
Note
If the window does not appear, use Windows
®
Explorer to run the setup.exe program from the
root directory of the
Océ
CD-ROM.
Before you begin you must know your wireless
network settings.
1
Write down the wireless network settings of
your access point or wireless router.
SSID
(Service Set ID or Network name)
_________________________
WEP Key
(if needed)
_________________________
WPA-PSK
(if needed)
_________________________
The WEP key is for 64-bit encrypted networks
or 128-bit encrypted networks and can contain
both numbers and letters. If you do not know
this information you should see the
documentation provided with your access point
or wireless router. This key is a 64-bit or 128-bit
value that must be entered in an ASCII or
HEXADECIMAL format.
For example:
WPA-PSK enables a Protected Access
Pre-shared key that allows the
Océ
wireless
machine to associate with access points using
TKIP and AES encryption. WPA-PSK uses a
Pre-Shared Key that is 8 or more characters in
length, up to a maximus of 63 characters.
See Chapter 3 of the Network User’s Guide for
more details
.
64-bit
ASCII:
Uses 5 text characters.
e.g. “Hello” (this is case sensitive)
64-bit
Hexadecimal:
Uses 10 digits of hexadecimaldata.
e.g. “71f2234aba”
128-bit
ASCII:
Uses 13 text characters.
e.g. “Wirelesscomms”
(this is case sensitive)
128-bit
Hexadecimal:
Uses 26 digits of hexadecimal data.
e.g.
“71f2234ab56cd709e5412aa3ba”
