Oce CS 5090, Руководство пользователя

Страница: 95 / 199

Quality 95
Select a colour mode
Colour mode refers to whether you are printing in colour or monochrome.
▼
To choose the colour mode
1
Press Setup Menu/Print Mode Menu/Colour Mode.
2
Choose Colour, Mono or Gray.
3
Press OK.
Select resolution (dpi)
Select your image resolution based on the viewing distance and user
specifications. This resolution is not the same resolution as in the resulting
rasterised file created with OGSL. For best results, check that the printer
resolution (dpi) matches the image resolution of the file you are printing.
Note:
Even though a rasterized image at 600 dpi is four times larger than the
same image at 300 dpi, the printing speed does not change (if other settings are
the same.) The printer always prints at 600 dpi, even if the print mode menu
setting displays 300 dpi. This setting refers to the resolution at which your
image was created, and not the actual resolution at which it prints.
Note:
OGSL automatically corrects for images with different input resolutions.
▼
To choose resolution
1
Press
Setup menu/Print mode menu/Dots per inch
.
2
Select
300
or
600
resolution.
RIP
resolution Printer dpi setting Result of printed output image
300 dpi
300 dpi 1 input pixel prints as
4 output pixels. The printed image is
the size of the original.
300 dpi
600 dpi 1 input pixel prints as
1 output pixels. The printed image is
1/4 the original size.
600 dpi
300 dpi 1 input pixel prints as
1 output pixels. The printed image is
4x the original size.
600 dpi 600 dpi 1 input pixel prints as
1 output pixels. The printed image is
the size of the original.