Oce CS 5090, Руководство пользователя

Страница: 160 / 199

160 Océ CS 5090 User Manual
Caring for inks and media
Follow these recommendations when handling inks, cartridges, and media for
best results.
Inks and ink cartridges
■
Each of the cartridges and ink reservoirs must contain the same type of ink.
■
Do not mix inks.
■
Do not refill containers.
■
Store ink and cartridges in the same environment as the printer whenever
possible.
■
Removing a cartridge may result in loss of negative pressure and cause it to
leak through the jet plate.
■
If you remove a cartridge from the printer, do not leave it exposed to the air
for an extended period because the jet may clog. Replace the original tape on
the jet plate. Place the cartridge in a cartridge garage or a sealed plastic bag
and store it at room temperature and out of direct sunlight.
■
Open new cartridges only when you are ready to install them.
■
Use only OCE brand ink refills and cartridges.
■
Connect cartridges to reservoirs which contain the same colour and ink type
as the cartridge.
■
Drawings using both black and colour elements must have aligned cartridges
(see ‘Cartridges calibration’ on page 41).
Attention:
Handle cartridges only by touching the plastic areas. Touching
the copper electrical interconnect or the inkjets can damage the cartridge.