Oce CS 5090, Руководство пользователя

Страница: 132 / 199

132 Océ CS 5090 User Manual
Streak marks
■
Clean the service station at least once a week, depending on the printing
frequency (see ‘Maintenance and cleaning’ on page 105).
■
Prime, clean, calibrate, or replace cartridges.
Line drawings bleed
■
Be sure you are printing on the coated side of the media. Load cut sheet
media so that the notch is on the side closest to the carriage. Load roll feed
media so the coated side is on the outside.
■
If your application software permits, use gamma correction to lighten
colours.
■
Too much air may have been drawn into the cartridge during extended
operation. Add 5 ml of ink and reinstall the cartridge.
Colours print as monochrome
■
Check that you have set the Colour/Mono mode to Colour. To change a
specific drawing from monochrome to colour or vice versa, you must switch
the Colour/Mono setting and re-send the file.
Ink smears after removing the print
■
Check that the ink is dry before removing the print. If you are printing area
fills, set the Dry Time option. Turn the dryer on.
Smudged or dark characters
■
Check that you are using the correct type of paper for the application.
■
Check that the paper is straight and unwrinkled when loading it into the
printer.
■
Prime, clean, calibrate, or replace cartridges.
■
Try a different print mode.
Improperly formed or misaligned characters
■
Calibrate cartridges.
Colour problems or shadowing
■
Calibrate cartridges.