Oce CS 5090, Руководство пользователя

Страница: 68 / 199

68 Océ CS 5090 User Manual
Choose paper options
The following paper options are available:
Supply Type
This setting allows you to select your supply options. The available options
are:
■
‘sheet’ if you intend to use cut sheet stock,
■
‘roll’ if you are about to use roll paper on the upper roll feeder (no takeup
available with this option.)
■
‘roll2’ if you are going to use roll paper with the lower roll feeder (no takeup
available with this option.)
■
takeup if you intend to use roll paper with the optional takeup system.
▼ ▼ ▼ ▼
To choose supply type
1
Press Setup ‘Menu/Paper Option Menu/Supply Type’.
2
Choose the supply type.
3
Press ‘OK’.
Media standard
When you print an image, you determine its size from the software application.
Check that you have loaded the media that is wide enough to accommodate the
image size because the printer automatically defines the print area based on the
width of the loaded media. If length is a problem, use roll media. If the media
width is smaller than the image size, the image may be truncated.
▼ ▼ ▼ ▼
To choose the media standard
1
Press ‘Setup/Paper Option/Media Standard’.
2
Choose the size of media you are loading.
3
Press ‘OK’.
■
Supply Type
■
Save Media
■
Media Standard
■
Margins
■
Auto-Load Delay
■
Auto-Cut