Oce cm5520, Руководство пользователя, Страница: 320 / 366

Network Settings 4
cm5520 4-113
Network Settings
Chapter 4
4.18 Status Notification Setting
Specify settings for sending notification of the machine’s status by e-mail to
the administrator. The status notification is sent if a notification destination
e-mail address is entered and if any of the notification conditions have been
set to “ON”.
The following notification addresses can be specified.
- IP address
- IPX address
- E-mail address
2
Note
Up to five IP addresses can be specified.
If an IP address or IPX address is to be specified, use the TRAP function
with SNMP. Set “TRAP Setting” on the SNMP Setting screen to “Allow”.
For details on “SNMP Settings”, refer to “SNMP Settings” on page 4-92.
Specifying an IP address
Settings can be specified for the following.
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.
2
Touch [Fwd.
→
] in the Network Settings screen, and then touch [1 De-
tail Settings].
3
Touch [3 Status Notification Setting].
The Status Notification Setting screen appears.
Parameter Description
Address Specify the notification host address.
Port Number Specify the port number to be used for communication. To change
the setting, press the [C] (clear) key, and then use the keypad to
type in the desired port number. (Range: 1 to 65535)
Community Name Type in the community name (15 characters or less).
Notification Item Specify the conditions when notification of the machine’s status is
sent. For details, refer to “Notification Item” on page 4-120.