Oce 9700, Руководство пользователя

Страница: 81 / 220

Special copy jobs 81
or,
5
Press the function button ‘Horizontal’ again.
6
Press the numeric or the higher/lower buttons until the required distance is set
to shift the image to the right.
Note:
When you shift the image horizontally you can only shift to the left or
to the right.
7
Press the function button ‘Vertical’.
8
Press the numeric or the higher/lower buttons until the required distance is set
to shift the image upwards.
or,
9
Press the function button ‘Vertical’ again.
10
Press the numeric or the higher/lower buttons until the required distance is set
to shift the image downwards.
Note:
When you shift the image vertically you can only shift up or down.
11
Make other settings as required.
12
Feed the original.
Note:
You can use one horizontal and vertical shift simultaneously.
Erasing part of the image
Suppose you want to copy just a part of an original. There are two ways to
accomplish this. The Océ 9700 allows you to select an area on the original. You
can then program the system to either delete all information inside (Blanking)
or outside the area (Framing) (see figure 76).
[76] Erasing a part of an original
Inside area; the
selected area
has not been
copied
Original
Outside area;
the selected
area has been
copied