Oce 9700, Руководство пользователя

Страница: 44 / 220

44 Océ 9700 Copier/Printer User Manual
The copying process will start. If ‘Automatic feed’ is displayed in the system
status area, the next original will be fed automatically without pressing Start.
Defining settings for the next original
You can define the settings for each original you want to copy. When
‘automatic feed’ is enabled, you should bear in mind that the original is
automatically pulled into the scanner. If you want to be absolutely sure about
the settings that belong to an original, insert an original when the settings are
correct.
Note:
To increase your versatility at the scanner input side, you can ask your
key operator to switch off Automatic Feed. When using the scanner in
‘non-automatic-feed’ mode you must press the start button for each new
original to be scanned. This offers the possibility to change the settings for the
next original, even if you already put the original in place on the scanner feed
table.
▼
▼ ▼
▼
Defining settings for the next copy job
1
Select all settings required for the next original.
2
Insert the next original.
If ‘Automatic feed’ is not active, press the start button.
If ‘Automatic feed’ is active, the original is fed automatically.
Note:
The Océ 9700 will wait to scan the next original, until the last copy
of the previous original is printed.