Oce 9700, Руководство пользователя

Страница: 43 / 220

Basic copy jobs 43
If you leave the scanner unattended for a while after the last copy
(approximately 25 seconds), it will return to its default settings and display:
[32] ‘Ready to copy’, the machine is ready to accept a new original and the engine is not printing
The ‘Ready to copy’ message invites you to define new settings and feed a new
original into the scanner. Note that the scanning of this ‘new’ original has to be
started by pressing the start button.
Note:
If you are copying thick originals or originals in a carrier sheet, it is
recommended to use the output at the rear side of the scanner to ensure correct
delivery (see ‘Original delivery after scanning’ on page 45).
▼
▼ ▼
▼
Making copies
1
Enter the number of copies using the numeric buttons.
2
Make other settings as required.
3
Insert the original face down and right aligned, along the original guide on the
scanner feed table (see figure 33).
Note:
When feeding the original, keep it in place until it is transported
(about 1 cm) by the machine.
[33] Inserting the original
4
Press the start button.
Ready to copy
...
...
....
...
....
...
....
...
....
...
...
...
...
....
...
....
...
....
...
....
...
...
...
...
....
...
....
...
....
...
....
...
...
..................................................................................
................
Copy
...............
Finishing
................
Program
Copies:
0
Zoom
selection
................
Machine
Roll
selection Exposure
●
❍
Automatic
A2 Paper
A3 Paper
● Automatic
❍
100.0%
●
...
....
0
..
...
..
Lighter
Darker