Oce 31x5E, Руководство по настройке и обслуживанию

Страница: 99 / 156

Maintenance 99
6
Push the toner bottle into the fill hole (see figure 79).
The seal at the bottle’s neck will automatically be pierced as it enters the toner
reservoir. This allows the toner to flow steadily out of the bottle.
[79] Placing the toner bottle into the fill hole
7
If necessary, tap the bottom of the bottle to empty it.
8
When the bottle is empty, remove it carefully.
9
Screw the top back onto the empty toner bottle. The empty bottle will be
collected next time the Océ service engineer visits.
Attention:
If you have accidentally spilt toner, refer to the safety data sheet
for Océ toner in appendix A for information about disposal and cleaning.
10
Close the cover of the toner reservoir and secure it using a coin or screwdriver.
11
Close the door.
12
Access the key operator system (see page 14).
13
Press the ‘Machine’section button.
The ‘Toner registration’ function registers the number of bottles of toner used
over a certain period of time. It is monitored by Océ service. You must indicate
that you have added one bottle to update the registration.
[80] ‘Toner registration’