Oce 31x5E, Руководство по настройке и обслуживанию

Страница: 96 / 156

96 Océ 31x5E Configuration and special maintenance
4
Unlatch the stapler cover by loosening the screw with a coin or a screwdriver
(action 1 in figure 74). Once the screw is loosened, you can slide the latch to
the rear.
[74] Unlatching and opening the stapler
5
Open the stapler by pulling the lever to the left and then lifting it (see action 2
in figure 74).
6
Remove the empty staple cartridge by pulling it up (see figure 75).
[75] Removing the staple cartridge
7
Remove any remaining staples from the stapler anvil.
8
Place a new cartridge by pushing it downward until it clicks into place. Make
sure that the first strip of staples does not slide out of the staple cartridge.
9
Close the stapler and pull the lever to the left until it is closed and lock the
screw.
10
Close the top cover.
11
Slide the frame to the left until it locks into place.
12
Close the paper compartment door.
latch
1
2