Oce 31x5E, Руководство по настройке и обслуживанию

Страница: 110 / 156

110 Océ 31x5E Configuration and special maintenance
Removing print jobs
If a major error has occurred, stop the DAC. If this does not solve the problem,
you may want to clear all print jobs from the DAC. It is also possible that the
problem is with the current job. Try to remove the current job first; if this does
not solve the problem, remove all jobs. The Océ service technician might also
request you to do so in order to perform service.
Note:
Please be aware that all jobs will be deleted from the automatic print
queue and that all mailboxes will be emptied.
[90] ‘Remove all jobs’ function
▼
▼ ▼
▼
Removing all print jobs using the control panel
1
Access the key operator mode (see ‘Accessing the key operator system using
the operating panel’ on page 14).
2
Open the ‘Printing’ section and select ‘DAC control’.
3
Press the ‘Remove all jobs’ function button.
4
Press ‘Start’ ( ) to confirm.
5
Exit the key operator mode.
▼ ▼ ▼ ▼
Removing all print jobs using Print Logic
1
Access the key operator system (see ‘Accessing the key operator system using
Print Logic’ on page 15).
2
Click the ‘Status’ tab.