Oce 31x5E, Руководство по настройке и обслуживанию

Страница: 107 / 156

Error handling 107
7
Push the upper bracket towards the back (action 1 in figure 86) and pull the
lower green handgrip up to unlock the staple strip (action 2 in figure 86).
[86] Unlocking the staple cartridge during a staple jam (50-sheet stapler)
8
Remove the staple cartridge by pulling it upwards.
9
Remove any staples that are stuck.
10
Remove any remaining staples from the stapler anvil.
11
Remove the remaining staple strip from the staple head.
12
Remove the protruding staple strip from the staple cartridge by sliding it
outwards.
13
Return the cartridge by pushing it downwards until it clicks into place. Make
sure that the first strip of staples does not slide out of the staple cartridge.
14
If necessary, close the stapler and lock it with the latch and screw.
15
Close the top cover.
16
Slide the frame to the left until it locks.
17
Close the paper compartment door.
18
Slide a small stack of paper into the stapling slot as shown in figure 71 on
page 94. Push it in until you hear the staple mechanism click. Repeat the
manual stapling 4 to 6 times, until a staple is inserted through the paper. The
stapler is now ready for operation.
1 2