Observint R16, Руководство пользователя

Страница: 37 / 109

31 R4, R8, R16 DVR V8.1.0 User Manual
SECTION 5
Alarm Configuration
Use the Alarm menus to configure alarm parameters. MOTION and PIR menus included here are similar to the alarm menus in
related sections of the manual.
5.1 Motion alarm handling
To open the Motion alarm menu, click the Alarm tile in then Main menu, and then click the Motion link in the left column. Use this
menu to configure how the recorder will react to a motion detection event. The Motion Alarm menu is shown below.
1. Configure the motion alarm options for the camera you are configuring:
—
Buzzer
: The DVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in seconds when the
motion is detected.
—
Record
: Click the settings icon and choose which channel(s) you want to record when the motion detection is triggered.
—
Post Recording : You can set how long after an event occurs that the DVR will continue to record. The recommended
recording length is 30 seconds but it can be set higher up to 5 minutes.
—
Show Message : Check the select box to display the motion icon on the live screen when the motion is detected.
—
Send Email
: You can let the DVR to send you an auto-email when the motion is detected. You must configure your email
settings to use this feature. See “6.3 Email setup” on page 39.
—
Full Screen
: If this function is enabled and a motion is detected in a channel, you will see that channel in full screen.
—
FTP Picture, Video Uploads : Check the select box(es) upload alarm images and/or videos to an FTP server when a PIR
event is detected. To enable FTP, please see “6.4 FTP setup” on page 40.
—
Picture, Video to Cloud Uploads : Check the select box(es) to upload images and/or videos to the Cloud service when
a PIR event is detected. To enable the cloud service, please see “7.2 Cloud settings” on page 46.
SECTION 5: ALARM CONFIGURATION