Observint R16, Руководство пользователя

Страница: 29 / 109

23 R4, R8, R16 DVR V8.1.0 User Manual
—
Buzzer : The DVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in seconds when the
motion is detected.
—
Alarm Out : Optional function. If your DVR support to connect to external alarm device, you can set to emit an alarm
tone.
—
Latch Time : To configure the external alarm time when motion is detected.
—
Record : Click the settings icon and choose which channel(s) you want to record when the motion detection is triggered.
—
Post Recording : You can set how long after an event occurs that the DVR will continue to record. The recommended
recording length is 30 seconds but it can be set higher up to 5 minutes.
—
Show Message : Check the select box to display the motion icon on the live screen when the motion is detected.
—
Send Email : You can let the DVR to send you an auto-email when the motion is detected. You must configure your email
settings to use this feature. See “6.3 Email setup” on page 39.
—
Full Screen : If this function is enabled and a motion is detected in a channel, you will see that channel in full screen.
—
FTP Upload : To upload alarm images to FTP server when motion is detected. To enable FTP, please see “6.4 FTP setup”
on page 40 .
7. Click
Save
to retain your settings.
3.2.5 PIR
Use the PIR menus to define a detection zone for cameras that support the PIR feature. PIR senses for a heat signature.
To setup cameras to use the PIR feature:
1. Check the select box to enable or disable PIR recording.
2. Set the sensitivity level for the area you setup for PIR detection. Level 1 the lowest sensitivity level, level 8 is the highest
sensitivity level.
3. Click the icon in the
Setup
column to open the setup menu. See below.
SECTION 3: CHANNEL - LIVE DISPLAY