Observint R16, Руководство пользователя

Страница: 34 / 109

28 www.Observint.com
1. In the menu shown above, select the options you prefer for each camera channel:
—
Record Switch : Check the select box to enable recording this channel.
—
Stream Mode : Choose video streams you want to record. You can record either Mainstream (only) or Dualstream
(Mainstream and Substream). If Audio is enabled on the channel, audio will also be recorded.
—
PreRecord : When this option is enabled, the DVR will begin recording a few seconds before an alarm event occurs. Use
this option if recording is triggered by motion.
2. Click Apply to save your settings.
4.2.1 Record Schedule
Use the Record Schedule graphical user interface (GUI) to define when recording a channel is enable for either Normal (continuous)
recording, Motion triggered recording, or PIR triggered recording during the week. Notice that the schedule three rows for each day
(one to mark Normal recording, one for Motion recording, and one for PIR recording), and one column for each 30 minute period.
For each 30 minute segment of each day of the week, you can disable recording (no recording mode selected), or enable either the
Normal, Motion, or PIR recording mode. The Recording Schedule GUI is shown below.
To configure a recording schedule for a camera channel:
1. Open the
Channel drop down list at the top of the menu and select the channel you want to configure.
2. Click on one of the recording modes listed to the right of the matrix (Normal, Motion or PIR).
3. Drag the mouse linearly or diagonally across an area of the matrix where you want to enable that recording mode. To disable a
recording mode on the schedule, select the mode you enabled, and then drag the mouse across the area you want to disable.
4. Select a different mode, and repeat the method in step 3 above. Recording modes cannot overlap.
SECTION 4: RECORD