Observint BLK-PTZ36XIR, Руководство пользователя

Страница: 18 / 62

10
2. Locate DIP switch packages SW1 (switches 1 .. 8) and SW2 (switches 1, 2).
3. Set the device address DIP switches 1 through 8 using the following table. Each device on the RS-485 network must have
a different address. You can configure up to 256 devices (address 0 .. 255) on the RS-485 network. The switch package
indicates which position is ON and which is OFF.
Table 1. DIP address switch settings
Dome Address
SW1 (address) switch number
1 2 3 4 5 6 7 8
0 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
… … … … … … … … …
255 ON ON ON ON ON ON ON ON
4. Set the network baud rate DIP switches 1 and 2 using the following table. Each device on the RS-485 network must use the
same baud rate. By default, the baud rate is set to 2400 baud (1
g OFF, 2 g OFF).
Baud rate
SW2 switches
1 2
2400 OFF OFF
4800 ON OFF
9600 OFF ON
19200 ON ON
5. Reinstall the SWITCH cover plate.
SECTION 2: INSTALLATION