40
SECTION 4: USING THE OSD MENUS
•
Clear all the patterns
. Enter
CLEAR PATTERN
menu, then click
IRIS+
to delete all the defined patterns.
4.8 Configuring Time Tasks
A time task is a preconfigured camera action configured to perform automatically at the specific time.
4.8.1 TASK 1: Set time tasks
You can configure up to 8 tasks. To configure a time task:
1.
Open the
TIME TASK
submenu: Go to
MAIN MENUS
g
DOME SETTINGS
g
TIME TASK
Time Task configuration menu
2.
Choose the task number.
a.
Move the cursor to
TASK NUM
and click
IRIS+
to enter edit mode.
b.
Click the up and down direction buttons to select the task number you want to configure.
c.
Click
IRIS+
again to confirm and exit edit mode of this column.
3.
Set the task status.
a.
Move the cursor to
TASK STATE
and click
IRIS+
to enter edit mode.
b.
Click the up or down direction buttons to set the task status to
ON
.
c.
Click
IRIS+
again to confirm and close the menu.
4.
Configure the task action.
Содержание BLK-PTZ36XIR
Страница 8: ...viii...
Страница 16: ...8 SECTION 1 INTRODUCTION BLK PTZCM Corner Mount PTZ Bracket 7 64 6 96 G 1 5 16 52...
