45
36x PTZ IR Outdoor Camera User Manual
SECTION 4: USING THE OSD MENUS
Set the password
2.
Click
IRIS+
to enter edit mode.
3.
Click the left/right buttons to move the cursor on the current password and click up/down or
FOCUS+
or
FOCUS-
buttons to
choose the number.
4.
Click the right direction button to move the cursor to
INPUT PW AGAIN
, then enter the password again.
5.
Click
IRIS+
to save the changes and close the menu.
6.
Open the
START USING
submenu and switch the status to
ON
, then click
IRIS+
to save the setting.
4.10.2 Restoring default dome settings
You can reset all dome settings to factory default parameters as shown in the table below. Dome settings include mostly PTZ
parameters, alarm parameters, and some system settings, for example, the dome address.
1.
Open the default dome settings menu. Go to
MAIN MENUS
g
RESTORE DEFAULTS
2.
Click
IRIS+
to restore the dome settings to the values shown in the table below, or click
IRIS-
to exit.
Table 5. Default dome settings
Parameters
Default Value
Dome address
0
Baud rate
2400 bps
120Ω matching resistance
Off
Soft address
Off
Содержание BLK-PTZ36XIR
Страница 8: ...viii...
Страница 16: ...8 SECTION 1 INTRODUCTION BLK PTZCM Corner Mount PTZ Bracket 7 64 6 96 G 1 5 16 52...
