32
SECTION 4: USING THE OSD MENUS
c.
When you click the
FOCUS+
button, the
ADJUST BLANK SIZE
message will appear. Click the up and/or down buttons
to increase/decrease the height of the mask, and click right/left buttons to increase/decrease the width of the mask.
Click
IRIS+
button to save the settings and return to the previous menu. The mask will turn to gray.
d.
To modify the mask, click
IRIS+
button to open the
SET BLANK
menu, then click
IRIS+
button again to reconfigure
the mask.
NOTE
The tilt range for configuring the privacy masks is from 0° to 70°.
4.
Enable or disable the privacy mask function
: Open the
BLANK STATUS
submenu, then click the up and down
direction buttons to set it ON or OFF. If no privacy mask is configured, you cannot set the status as ON.
5.
Delete the privacy mask
: Open the
CLEAR BLANK
menu to delete the current privacy mask.
4.4 Configuring PTZ control parameters
You can configure panning, tilting and zooming movements, and configure PTZ control functions including presets, patrols,
patterns, etc. for the camera.
4.4.1 Configuring PTZ parameters
Open the PTZ configuration menu. Go to
MAIN MENUS
g
DOME SETTINGS
g
MOTION PARAMETER
PTZ configuration menus
Содержание BLK-PTZ36XIR
Страница 8: ...viii...
Страница 16: ...8 SECTION 1 INTRODUCTION BLK PTZCM Corner Mount PTZ Bracket 7 64 6 96 G 1 5 16 52...
