Obihai OBi110, Руководство администратора

Страница: 39 / 202

Copyright 2010-2012 Obihai Technology, Inc. 39
Web Server-Based Local Configuration
The OBi device has an integrated device management web server which can be accessed
from a PC or similar device using a browser. Although all popular browsers are tested for
compatibility with the OBi device management web server, there may be inconsistencies
which arise from time to time. Please contact
support@obihai.com if you have any
questions about the OBi device management web server and how it appears in your
browser window.
Access the OBi Device Management Web Page:
1. From a phone attached to the OBi, dial * * * to access the OBi Config Attendant.
2. Choose “ 1 ” to hear the IP Address of the OBi read back to you. Write this down.
3. Enter the OBi IP Address in a local PC web browser address field:
4. When prompted, enter “admin” for user name and “admin” for password.
When you access the OBi device management web page, you will be prompted for a user
name and password. There are two levels of access to the OBi web page – User Level
and Admin Level. The default “user name / password” for User Level access is “user /
user”. The default “user name / password” for Admin Level access is “admin / admin”.
The Admin and/or User passwords may have been changed using the OBi device web
page, provisioning by a service provider or via the OBiTALK web portal (Admin only).
Please be sure you have access to the correct Admin or User password before you
attempt to log on to the OBi Device Management Web Page.
The OBi device management web page is organized into sections to allow for a
manageable and compartmentalized approach to configuring the many hundreds of
parameters available on the OBi device. Use the expandable / collapsible menu tree on the left side of the page to easily
navigate the various configuration parameter sections of the OBi device.
IMPORTANT: Every configuration page must be submitted individually after changes made on the page.
Otherwise those changes will be discarded once you navigate to another page. Most changes will require a
reboot of the unit (by clicking the reboot button for instance) to take effect. However, you may reboot the
unit just once after you have made and submitted all the necessary changes on all the pages.
When the device is operating in router mode (OBi202, OBi302 only), the built-in web server may be accessed from the LAN
side or the WAN side. While access from the LAN side is always allowed, for security reasons, the access from the WAN side
may be disabled by configuration. In fact, the WAN side access to the web server is disabled by default. You can enable this
option on the device web page (from the LAN side), or by using the device configuration IVR (* * * 0 option 30) from an
attached telephone.