Obihai OBi110, Руководство администратора

Страница: 160 / 202

Copyright 2010-2012 Obihai Technology, Inc. 160
- Bit0 (LSB) = G711u
- Bit1 = G711a
- Bit2 = G726r16
- Bit3 = G726r24
- Bit4 = G726r32
- Bit5 = G726r40
- Bit6 = G729
$LDN = last dialed number (for redial) (global; read only)
$LCR = last caller’s number (for call return) (global; read only)
$SPD[ n ] = number for the speed dial n ( n = 1 – 99) (global; admissible value: literal or token representing a phone number)
$CODE = the digit(s) representing the variable part of a star code (see examples below; read only)
Variable names are CASE INSENSITIVE.
Star Code Script Actions ( ACT )
The general format of an action: ACT ( par , par , ….)
The following actions are supported:

set( VAR , token ) = Set the given VAR to the value represented by token .

call( token ) = Call the number represented by token.
o PHONE Port:: OutboundCallRoute
will be applied when making the call (but not the
DigitMap
)

rpdi( token ) = repeat dial the number represented by token

coll( VAR ) = collect a number from the user and store it as the value of the parameter(s) represented by VAR .
o
The number is collected with
PHONE Port:: DigitMap
applied

say( token ) = announce the value represented by token
o
Values are announced as a list of alphabets or numbers
where token can be a literal (such as 1234) or another variable (such as $CFAN or SP1($CFBN))

btdscvr() = make the OBiBT dongle discoverable for the next 120s
Action names are CASE INSENSITIVE.
Star Code Script Format
General Format: code, name, action1, action2, action3, …

code = the star code, such as *72. It may contain a variable part enclosed in parenthesis, such as *74(x|xx)
o
The variable part as entered by the user are stored in the variable $CODE

name = a descriptive name of the function of this star code, such as Call Forward Unconditional

action1, action2, … = a valid action with parameters
Actions are carried out one-by-one in the order as specified in the script.
Restrictions:

At most 1 coll action per code.

Either 1 say or 1 call action at most per code, and it must be the last action in the script.