Obihai OBi110, Руководство администратора

Страница: 101 / 202

Copyright 2010-2012 Obihai Technology, Inc. 101
Log All Messages
Log All Except REGISTER Messages
X_SipDebugExclusion (Available on OBi202 and OBi302 only)
A list of SIP methods to exclude from the syslog for this SP
service. For example: notify, subscribe
X_SatelliteMode Enable satellite mode on this trunk. In this mode, the user must
explicitly sign on (using * code) to receive phone calls on this
trunk. The SIP REGISTER sent by the OBi to the ITSP on this trunk
will indicate if the user wants to sign on (and therefore takes
over the incoming calls for this account). This feature is only
applicable if the service is provided by an OBiPLUS system No
X_Proxy (Available on OBi202 and OBi303 only).
Enable proxy mode operation on this SP service. If enabled, the
SP will accept SIP Registration from one client device from the
LAN side, which must be using the same user-id and password as
this SP’s AuthUserName and AuthPassword parameters, for
authentication. The client device, known as the
local_client , may
send SIP INVITE to the OBi at this SP to make calls; this SP’s
InboundCallRoute must be set up with the proper routing rule to
handle calls from the local_client.
The SIP Proxy Server parameter on the local_client should be set
to:
<obi-number>.pnn.obihai.com:<sp-user-agent-port>
where <obi-number> is the 9-digit OBi number of this device,
<sp-user-agent-port> this SP’s X_UserAgentPort parameter.
For example, SP1 has a local_client with the userid 4086578118
and the client wants to make and receive calls using SP3 which is
set up for Google Voice. The SP1 InboundCallRoute shall include
the following rule:
{4086578118>:sp3}
The SP3 InboundCallRoute shall be:
{sp1(408657118@local_client)}
No
X_ProxyClientConfig (Available on OBi202 and OBi302 only)
A list of IP phone attributes separated by a space or newline
character for provisioning an IP Phone with the given MAC
address and model number. Each attribute has the syntax
<attribute-name>=”<attribute-value>”
with no white space before and after the ‘=’ sign. Every character
within the pair of double quotes is taken as the attribute’s value.
The following attributes are supported:
-
mac: Required. The MAC address of the IP Phone in 12-hex-
digit format, such as “008e3c123456”
- model: Required. The make/model of the phone, such as
"Cisco/SPA504G"