Obihai OBi110, Руководство администратора

Страница: 66 / 202

Copyright 2010-2012 Obihai Technology, Inc. 66
LAN Settings Parameter Guide:
Parameter Description
Default
Setting
LAN Settings
CurrentRouterIPAddress
The current IP address of the router on the LAN side (read only). It is blank if
OBi is operating in bridge mode.
OperationMode
The Networking Operation Mode for the device. It can be one of the following
values:
Router
Bridge
Router
RouterIPAddress
The LAN side IP address to be used by the router. If it conflicts with the WAN
side IP address, the OBi will automatically pick a different LAN side IP address
to resolve the conflict.
192.168.10.1
SubnetMask
The LAN side Subnet Mask to be used by the router. It can be one of the
following values:
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.0
DHCP Server Settings
Enable Enable the DHCP Server on the LAN side Yes
ClientAddressRangeStart
The value of this parameter together with the values of
CurrentRouterIPAddress and SubnetMask determine the starting IP address
to assign to DHCP clients. The value of this parameter is the starting value of
the lower bits of the 32-bit starting IP address not masked by the
SubnetMask, and it MUST fit within the unmasked range of the SubnetMask.
Here are some examples:
SubnetMask CurrentRouter
IPAddress ClientAddress
RangeStart First Client IP
Address
255.255.255.0 192.168.10.1 100 192.168.10.100
255.255.255.0 192.168.2.1 50 192.168.2.50
100
MaximumClients
The size of the IP address range from which to pick addresses to assign to
DHCP clients that are not in the DHCP reservation list. If the range extends to
addresses outside of the SubnetMask, a red exclamation mark (
! ) will be
shown next to the value on the OBi device web page.
50
AddressLeaseTime IP address lease time in minutes 1440
LocalDomainName Local Domain Name for the LAN