Obihai OBi110, Руководство администратора

Страница: 122 / 202

Copyright 2010-2012 Obihai Technology, Inc. 122
- If the pairing information is removed from the OBi after initial pairing and connection with a mobile phone, it will
not automatically connect with the phone next time it comes in range. You must then go to your mobile phones’s
Bluetooth setup screen and explicitly select the paired device “OBi” to re-establish connection
- OBi remembers the paired devices based on particular OBiBT dongle that is used during pairing. Each OBiBT dongle
has a different hardware ID. If you replace the dongle with a different one, the existing device pairing information
will not be valid and OBi will not be able to recognize the previously paired devices when they are in range
OBiBlueTooth Call Features
OBiBlueTooth is the voice service that is made possible with an attached OBiBT dongle that is connected with a (in-service)
mobile device. This service allows you to make or receive mobile calls using a conventional phone attached to the OBi
phone port, or by bridging in a VoIP call over a SP service or OBiTALK service. OBiBlueTooth only allows one incoming or
outgoing call on OBiBT at a time. In other words, there is no 3-way call or call-waiting support on OBiBlueTooth. The
supported call features are similar to the equivalent ones supported under SP or OBiTALK service.
The screenshot below shows the Calling Feature parameters on the OBiBluebooth device web page, which should be self-
explanatory.