NXP Semiconductors
UM11636
KITPF5200SKTEVM evaluation board
PF5200. If the USB cable is not plugged in, the State message displays "NOT
DETECTED".
4. To establish communication between the FRDM- KL25Z and the PF5200 and allow
the GUI to take control, click
Start
in the upper left corner.
5. When the GUI gains control, the PF5200 header text in the upper left corner changes
from red to green. The State indicator in the bottom left displays CONNECTED and
initial events appear in the Log Window.
6.3 Programing a TBB operation
The Try Before Buy (TBB) operation allows you to create and test a preliminary version of
a desired configuration in the mirror registers prior to submitting the configuration to the
OTP fuse burning process. The TBB configuration is activated in the PF5200 as soon as
PWRON goes active (assuming VIN is above VIN_UV).
1. To configure the mirror registers, use the Script tool (see
) to
load and execute the TBB script file. In the bar at the bottom of the Script Command
UM11636
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 13 December 2021
44 / 51