NXP Semiconductors
UM11636
KITPF5200SKTEVM evaluation board
5.2.3.3.2 Script
The script editor allows you to create script sequences or to send existing sequences
to the device. You can read/write individually to a register, to a digital pin, or to an
analog pin. You can also emulate an OTP configuration with this tool. The Script tool is
accessible from Tool access bar.
The Script editor window consist of four sections:
•
Log window
•
Script commands
•
Script commands window
•
Script results window
Log window
The Log window list events as they occur in real-time when the script is executing. The
filter messages box allows you to limit log messages to certain events (Register Read,
Register Write, Pin Read, Pin Write). The Log window menu bar also contains buttons
for saving the log contents to a file, clearing the log, or running the script in the script
command window.
Commands
The Commands window allows you to enter commands into the script command window
simply by clicking the appropriate command. This facilitates command entry and assures
that there are no syntax errors in the command. The commands are organized into
functional categories in the menu. Opening one of menu tabs and selecting the desired
pin causes the associated command to appear in the Script Command Window.
UM11636
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 13 December 2021
26 / 51