NXP Semiconductors
UM11636
KITPF5200SKTEVM evaluation board
• Digital pins:
enters the script command to read the value of the selected digital pin.
• Analog pins:
enters the script command to read the value of the selected analog pin.
• Registers:
enters the script command to read or write to functional and OTP functional
registers.
• Mode:
enters the script command to set the mode to either tbb-mode or user-mode.
• Control:
enters the script command to pause script execution or to delay script
execution. By default, 300 ms is entered as the delay value, but this value can be
edited in the Script command window and changed to any ms value. If a Pause
command is entered in the Script command window, execution halts when the Pause
command is encountered and a pop-up window appears prompting you to continue
execution.
• Generator:
clears the content of the script command window and enters an OTP script
sequence.
All menu items function in a similar fashion. The example below shows a typical process
using the
Registers
menu tab.
Clicking the Register tab brings up the panel shown in the top image. A Write operation
to the CTRL1 register in the functional register group has been selected. The value 0x00
is selected as the value to be written to the register. Pressing Enter with the cursor in
the value field enters the well-formed command in the Script Command Window (bottom
image).
Script commands window
UM11636
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 13 December 2021
27 / 51