NXP Semiconductors
UM11636
KITPF5200SKTEVM evaluation board
• OTP functional:
OTP functional registers access (OTP mirrors register map)
In each submenu, registers are organized by categories in the panel on the left.
The PF5200 has two types of registers. Read-only registers (for example, ID registers)
appear with a Read button only. Read/Write registers (for example, Interrupt Registers,
Fault Management, etc.) appear with both a Read and a Write button.
Clicking
Select All
checkbox in the bottom left side of the register panel allows you to
simultaneously read or write to all of the registers in the window. Clicking
Reset
button
switches all of the bits in the registers to 0.
To open a window that shows the name and description of all the bit fields in a register,
click the green pen icon above the register.
5.2.3.4.2 SW regulators
The SW regulators tab allows you to read and write the parameters related to the SW1
and SW2 regulators. For all graphical panels, register names that appear in blue with a
(OTP) suffix are set by OTP and available later in the I
2
C register mapping. For example,
in the following figure:
VSW_RUN (OTP)
is part of OTP and the I
2
C functional mapping
SW_RUN_MODE
: is available only in the I
2
C functional mapping
UM11636
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 13 December 2021
37 / 51