
NXP Semiconductors
UM11723
KITPF5200FRDMEVM evaluation board
Position
Function
Description
J22
PGOOD_SEL
PGOOD setting either PGGO/GPO or output of temperature junction
analog voltage
Table 2. Jumper or switch functions
...continued
4.3.1 VIN connectors
Nominal VIN voltage is 3.3 V minimum / 5.5 V maximum.
Schematic label
Signal name
Description
J1
VIN
VIN supply input
J4
GND
Ground
Table 3. VIN connector (J1 / J4)
4.3.2 SW1OUT and SW2OUT connectors
Each switch can be controlled between 0.6 V / 1.2 V.
Current capability is up to 8.0 A, assuming current limit is correctly set.
Voltage and current limits are set by OTP.
Schematic label
Signal name
Description
J5
GND
Ground
J2
SW1OUT
SW1 output power supply
J6
GND
Ground
J3
SW2OUT
SW2 output power supply
Table 4. SW1OUT and SW2OUT connectors
4.3.3 SW1 switch
This switch gets control only if the PWRON_SEL jumper is in the PWRON_SW position.
Otherwise, SW1 has no effect.
Schematic label
Description
SW1 ON
PWRON set to 1
SW1 OFF
PWRON set to 0
Table 5. PWRON_SEL switch (SW1)
4.3.4 TBBEN_SEL jumper (J9)
This jumper selects the input voltage to the TBBEN pin.
Schematic label
Signal name
Description
J9-1-2
V1P5D
TBBEN is supplied with V1P5D (TBB mode forced)
J9-3-4
TBBEN_MCU
TBBEN pin is controlled by the MCU in Normal or
TBB mode
J9-5-6
GND
TBBEN is tied to Ground (Normal mode forced)
Table 6. TBBEN_SEL jumper (J9)
UM11723
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1 — 8 December 2021
7 / 51