manualshive.com logo in svg

NXP Semiconductors KITPF5200FRDMEVM, Руководство пользователя, Страница: 35 / 51

Поделиться
Скачать
NXP Semiconductors KITPF5200FRDMEVM Скачать руководство пользователя страница 35

NXP Semiconductors

UM11723

KITPF5200FRDMEVM evaluation board

• OTP Details section:

 collects and stores information about the customer and OTP

version. All the information entered in this section is retained as part of the .cfg and

TBB file.

–

The Custom Details window collects information related to the customer.

–

The Program Details window, in addition to comments related to the application,

allows you to do the following:

– Select device type (see Configuration tab for details).

– Display the OTP ID (set by NXP only).

– Display the build part number (set by NXP only).

– Select target market, either automotive or industrial.

Note: 

 All other panels, tabs or windows are the same for both QM an ASIL B parts.

5.2.3.3.6 IO pins

The IO pins tool provides a means of reading and setting the PF5200 IO pins (PGOOD,

RESETBMCU, PWRON, TBBEN).

UM11723

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

User manual

Rev. 1 — 8 December 2021

35 / 51

Содержание KITPF5200FRDMEVM




















































Отзывы:

Нет отзывов