NXP Semiconductors
UM11723
KITPF5200FRDMEVM evaluation board
1 Introduction
The KITPF5200FRDMEVM evaluation board user guide is intended for the engineers
involved in the evaluation, design, implementation, and validation of PF5200, Fail-safe
system basis chip with multiple SMPS (Switch Mode Power Supplies).
This board allows to run performance test as the device is soldered on it. For OTP
programming in development phase, use KITPF5200SKTEVM.
This document contains all of the information required to evaluate the PF5200 Fail-safe
system basis chip with two SMPS connected in single or dual mode.
The document covers connecting the hardware, installing the software and tools,
configuring the environment, and using the kit.
2 Finding kit resources and information on the NXP web site
NXP Semiconductors provides online resources for this evaluation board and its
supported device(s) on
The information page for KITPF5200FRDMEVM evaluation board is at
. The information page provides overview
information, documentation, software and tools, parametrics, ordering information
and a
Getting Started
tab. The
Getting Started
tab provides quick-reference
information applicable to using the KITPF5200FRDMEVM evaluation board, including the
downloadable assets referenced in this document.
2.1 Collaborate in the NXP community
The NXP community is for sharing ideas and tips, ask and answer technical questions,
and receive input on just about any embedded design topic.
The NXP community is at
3 Getting ready
Working with the KITPF5200FRDMEVM requires the kit contents, additional hardware,
and a Windows PC workstation with software installed.
3.1 Kit contents
The KITPF5200FRDMEVM kit contains the following items:
•
Assembled and tested evaluation board and preprogrammed FRDM-KL25Z
microcontroller board in an anti-static bag.
•
3.0 ft USB-STD A to USB-B-mini cable
•
Jumpers mounted on board
•
PF52 part soldered on top
•
Quick Start Guide
3.2 Additional hardware
In addition to the kit contents, the following hardware is necessary when working with this
kit.
UM11723
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1 — 8 December 2021
4 / 51