
NXP Semiconductors
UM11183
KITFS85SKTEVM evaluation board
UM11183
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User guide
Rev. 2.0 — 20 February 2019
33 / 50
8 Using FlexGUI
To follow the steps in this section, make sure that the board is connected using the
appropriate hardware configuration (see
Section 7.2 "Working in OTP emulation mode"
).
Note:
It is recommended to use the latest version of FlexGUI.
8.1 Starting the FlexGUI application
After FlexGUI is launched with the
flexgui-app.bat
file, the FlexGUI launcher displays
available kits.
Communication bus, SPI or I2C can be selected at this level. It is also possible to switch
from one to the other using the communication tab from the main panel (see
"Establishing the connection between FlexGUI and the hardware"
Figure 23. Launcher panel - bus selection
When the configuration is selected, click
OK
.
8.2 Establishing the connection between FlexGUI and the hardware
The board must be connected to the USB before establishing a connection.
•
Click
Search
to detect the COM port of the board.
•
Click
Start
to enable the connection.