NXP Semiconductors
UM11183
KITFS85SKTEVM evaluation board
UM11183
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User guide
Rev. 2.0 — 20 February 2019
2 / 50
1 Introduction
This document is the user guide for the KITFS85SKTEVM evaluation board.
This document is intended for the engineers involved in the evaluation, design,
implementation, and validation of FS8500 Fail-safe system basis chip with multiple
SMPS and LDO.
The scope of this document is to provide the user with information to evaluate the
FS8500 Fail-safe system basis chip with multiple SMPS and LDO. This document covers
connecting the hardware, installing the software and tools, configuring the environment
and using the kit.
The KITFS85SKTEVM enables development on FS84/FS85 family of devices. The kit
can be connected to the FlexGUI software which allows you to play with registers, try
OTP configurations, and burn the part.
The devices can be placed and removed easily from the board by using the socket. The
device OTP can be burned three times, which provides a good flexibility. This board
supports FS84/FS85 family of devices.
2 Finding kit resources and information on the NXP web site
NXP Semiconductors provides online resources for this evaluation board and its
supported device(s) on
.
The information page for KITFS85SKTEVM evaluation board is at
. The information page provides overview information, documentation,
software and tools, parametrics, ordering information and a
Getting Started
tab. The
Getting Started
tab provides quick-reference information applicable to using the
KITFS85SKTEVM evaluation board, including the downloadable assets referenced in this
document.
2.1 Collaborate in the NXP community
The NXP community is for sharing ideas and tips, ask and answer technical questions,
and receive input on just about any embedded design topic.
The NXP community is at
.
3 Getting ready
Working with the KITFS85SKTEVM requires the kit contents, additional hardware and a
Windows PC workstation with installed software.
3.1 Kit contents
•
Assembled and tested evaluation board in an anti-static bag
•
3.0 ft USB-STD A to USB-B-mini cable
•
Two connectors, terminal block plug, 2 pos., str. 3.81 mm
•
Three connectors, terminal block plug, 3 pos., str. 3.81 mm
•
Jumpers mounted on board