Nvidia QUADRO G-SYNC II, Руководство пользователя

Страница: 35 / 73

Note:
Any time you modify the genlock settings (for example, by
clicking
Use House Sync if Present
or
Add Devices
), you must
fi rst click
Disable Frame Lock
to disable synchronization.
The G-Sync section shows the status of the sync signals for the X server
 After connecting the house sync, the external sync
signal frequency is displayed in the section
Rate .
 The Receiving, Timing, Stereo, and House indicators should be green.

If the Timing LED is red—indicating the display is not
synchronized to the timing signal—then see Synchronizing
to the External House Signal for further instructions.

See “Understanding the Status Indicators” for more
information about the status indicators.
Synchronizing to the External House Signal
This section describes other steps you may need to
take after connecting a house sync signal.

Adjusting for Interlaced External House Signals
If the external signal is an interlaced signal, then check
the
Sync to fi eld 1 check box and click Apply .
 Generating a Sync Frequency Slower than the External House Signal
If the external sync frequency is not support by your display because
it is too high or if you are using an interlaced signal, you can generate
a sync signal of a reduced frequency by entering a number in the
Sync
interval box.
This number represents the number of external sync pulses to
receive before generating the synchronization pulse. For example,
if the house sync frequency is 120 Hz, then entering 1 in the
Outgoing sync interval box results in a 60 Hz sync pulse.
NVIDIA Frame Synchronization Under Linux
31