Nvidia QUADRO G-SYNC II, Руководство пользователя

Страница: 33 / 73

Set Up the Hardware
1. Start the system, then connect the external source signal to the House
Sync connector (BNC) of the Quadro G-Sync II option card.
The Quadro G-Sync II supports the following
external synchronization signal types:
 TTL (3.3 volt level)
 Composite Bi-level (NTSC or PAL sources
use bi-level composite signals)

Composite Tri-level (HDTV sources commonly
use tri-level composite signals)
2. Check the LED on the connector panel.

A green LED means the hardware has detected the
timing signal, and you can proceed to the next step
 An occasional red fl ash is OK.
 A red LED means the hardware can’t detect the timing signal.
 Check the signal source and correct the
problem before proceeding.
NVIDIA Frame Synchronization Under Linux
NVIDIA Quadro G-Sync II
Connector Bracket
Server Sync Source
29