Nvidia QUADRO G-SYNC II, Руководство пользователя

Страница: 18 / 73

Using the House Sync Signal
This section describes how to:

Select which edge of the house sync signal to use as the trigger
 Double the trigger frequency from the house sync signal
 Properly handle interlaced house sync signals
 Introduce a timing delay to the house sync signal
1. From the NVIDIA Control Panel Select a Task pane ,
under Workstation , click Synchronize Displays.
2. Make sure that the On this system radio button
under The timing server is selected.
3. Open the Server Settings dialog box using
one of the following methods:

From the Synchronize Displays page, click Server Settings .
4. Under The synchronization pulses are based on , click the An
external house sync signal radio button.
The Server Settings dialog
box will show the incoming
house sync frequency. A
frequency of 0.00 Hz indicates
that the system has not yet
been set as the server.
NVIDIA Quadro G-Sync II User Guide
14