Nvidia QUADRO G-SYNC II, Руководство пользователя

Страница: 19 / 73

5. Con fi gure additional synchronization settings as needed:
 Select which edge of the sync signal to use to trigger
the sync pulses - leading or falling edge.

If necessary, you can double the sync frequency by
clicking the Both edges radio button under Trigger
sync pulses from the frame start signal using.
Note:
This control is available only for TTL signals.
 If the external signal is an interlaced signal - such as
is used to drive a 1080i display - then click the
The
external signal is an interlaced signal check box.

This causes the fi rst fi eld of an interlaced signal to
be used to synchronize the display. For example, for
a 60Hz interlaced signal, the effective 120 Hz
fi eld
sync is converted to a 60 Hz frame-sync signal.
 To introduce a timing delay to the house sync signal:
In the
Sync delay text box enter the delay (in
microseconds) that you want to introduce.
6. Click OK .
A Monitor Settings dialog box appears, asking if
you want to keep the changed settings
.
7. Click Yes to keep the new settings, or click No
to revert to the previous settings.
NVIDIA Frame Synchronization Under Windows
Outgoing Sync triggered from leading and falling edge
House signal
Sync Pulse
15