Nuvo Navigator Lift 150 Dual, Руководство по установке

Страница: 28 / 96

28
6 Mounting Threaded Bolts to the Interface Plate
1568911, Edition 2019-04, Version 0
EN
Figure 12: Mounting the upper insulations to the threaded
bolts
6.2.3 Mounting the threaded bolts to the Single / Duo interface
plate
(See "Figure 12")
1. Screw 1 hexagonal nut M16② each onto the 6/12 threaded bolts
M16③ and then place 1 spring ring① each.
Pendant system dropping
If the threaded bolts M16③ are not completely screwed
in, they may break out of the interface plate
1
and cause
the pendant system to drop:
• Make sure that all shortened threaded bolts M16③
are completely screwed into the interface plate
1
up
to the end stop on the raw ceiling.
Pendant system dropping
The pendant system can drop if the fixing elements have
not been properly tightened:
• Tighten all hexagonal nuts M16② with a tightening
torque of 195Nm.
2. Check that the shortened threaded bolts M16③ are securely in
place at the correct distances to each other:
• The shortened threaded bolts M16③ must be completely screwed
into the interface plate
1
.
• The 6/12 hexagonal nuts M16② must be tightened to 195Nm.
3. Continue the installation as described in Chapter 6.2.4 on Page 29.

WARNING