Nuvico MP-OV22N, Руководство по установке

Страница: 31 / 60

31
3. Program and Operation
Select “MOTION SETUP” and pushing the Joystick to the left or right. Then the MOTION
setup displays.
MOTION SETUP
SENSITIVITY : 07
POSITION : ALL
DELAY : 00 SEC
OUTPUT : OFF
HOLD TIME : 03 SEC
EXIT (ESC TO EXIT)
Set
SENSITIVITY
: 01 ~ 10
Set
POSITION
: ALL, CENTER
Set
DELAY
: 0 ~ 05 SEC
Set
OUTPUT
: OFF, ON
Set
HOLD TIME
: 03 ~ 99 SEC
Select “
AE SETUP
” and pushing the Joystick to the left or right. Then the AE setup
displays. Refer to the AE SETUP in the camera setup.
6. Set “
DWELL TIME
”. (03 ~ 99 seconds)
7. To select the next page of Presets, scroll the page by pushing the Joystick to the left on
the first and last columns of the menu.
8. Repeat step 2 through 7 for each additional Preset position.
9. Select “SAVE AND EXIT” and push the Joystick to the right or press the IRIS Open key.
Press the ESC or IRIS Close key to exit the program without saving.
NOTE: Press the HOME key at programmed Preset position(*) to delete a programmed
Preset view.