Nuvico MP-OV22N, Руководство по установке

Страница: 28 / 60

28
3. Program and Operation
To set the position using the Preset position:
a. Before entering the Auto Scan menu, select a Preset position as a starting point for Auto
Scan.
Example: 2 + PRST key and do step 1 to 5 from the above. In step 6, just press the SHIFT
key at the start angle position, the current position will be displayed as a start position.
b. Save and exit from the menu.
c. In normal mode, call a Preset to be the end point of Scan. Press 3 + PRST key then press
the SCAN key to enter the Auto Scan menu. Move the cursor position to END ANGLE.
Just press the SHIFT key at the end angle position. Save and exit from the menu.
Press the SCAN key on the angle field to display with the small OSD. Then the screen will
show as below.
AUTO SCAN AREA SETUP
(CTRL KEY)
NUMBER01
START: ----- ----- ---
END : ----- ----- ---
EXIT(ESC TO EXIT)
The setting procedure is the same as above.
NOTE: 17: AUTO-PAN mode (Endless panning)