27
3. Program and Operation
7. Select “END ANGLE”. Hold down the SHIFT key while moving the Joystick to select the
end position. The end position angle should be larger than start position. Release the
SHIFT key to complete the selection of the end position. Or press the IRIS Open key then
the “CTRL” displays. Move the desired position and the zoom position. Press the IRIS
Close key then the “CTRL” disappears. To adjust at the 0.1 degree interval, twist the
Joystick at the pan field and the tilt field. To adjust at the one zoom interval, twist the
Joystick at the zoom field.
8. Set “SCAN DIR” to CCW or CW.
9. Select “SWAP”, Set to ON, to exchange the start angle and the end angle.
10. Set “DWELL TIME”.
11. Select “SAVE AND EXIT” and push the Joystick to the right or press the IRIS Open key.
Press the ESC or IRIS Close key to exit the program without saving.
NOTE: Pressing the HOME key deletes stored data at the angle field.
Содержание MP-OV22N
Страница 1: ...1 ...
Страница 9: ...9 1 Introduction 1 3 EasyTrak Mini PTZ Dome Camera Dimensions ...
Страница 60: ......