NuAire LabGard ES NU-543-300S, Руководство по эксплуатации и обслуживанию

Страница: 60 / 72

OM0239 Page 60 of 72
April 2021
8.2.4 Auto Decontamination
Auto decontamination is intended to be used with an automated decontamination system (i.e. Bioquell H₂O₂
system, etc.) The intent is to be able to run the cabinet blower automatically during the automated
decontamination cycle to improve the vapor/gas movement throughout the cabinet. The following
FlowGard™
menus allow the cabinet to be sequenced with the automated decontamination system.
- Total duration is the total automated decontamination cycle time, so both the cabinet Auto
Decontamination time duration and the automated decontamination system cycle time are sequenced
and run together.
-
Blower run time is the length of time the blower will run during and of the (4) possible blower start times.
-
Blower start schedule is the start time of (4) possible blower start times during the decon cycle.
-
Initiate decon cycle provides a short safety check list the must be answered yes before the decon cycle
can be initiated.
-
Once the Auto Decon cycle is initiated, the following display indicates cycle progress until the times reach
the end of their duration.
Auto Decontamination
Total duration: (hh.mm) 3:00
Blower run time: (mm.ss)
1:00
Blower start schedule
Initiate decon cycle
Blower Start Time
Start blower at: 1:00
Start blower at: 1:30
Start blower at: 2:00
Start blower at: 2:30
Initiate Auto Decon
Cabinet sealed: No
Gas in/out connected: No
Blower stopped: No
Perform Auto Decon
Auto Decon in Progress
Next blower 1:00
Finished in 3:00
Press Alarm silence to abort
0:00